CSS-based layout, no tables used!
Clean, fast-loading code and a professional design.
Starter web site helps you to get started quickly.
Clean, fast-loading code and a professional design.
Starter web site helps you to get started quickly.
Technical Articles
Submission Guidelines for Technical Articles
I. Vacuum Pumps
Considerations
for Primary Vacuum Pumping in Mass Spectrometry Systems
A.D. Chew, A. Cameron, D. Goodwin, J. Hamilton, T. Hawley-Jones,
P. Meares, J. Pumfrey, J. Ramsden, and D. Steele, BOC Edwards
Dry
Mechanical Vacuum Pumps for Vacuum Degassing
Vic Cheetham, BOC Edwards
II. Vacuum Instrumentation
III. Vacuum Hardware
Increase
Vacuum Processing Throughput and Yield Using Advanced Downstream
Pressure Controlled Methods
P.M. Cederstav, Nor-Cal Products, Inc.
IV. Vacuum Systems – Design, Operation, and Maintenance
Practical
Vacuum: Good Design, Procedures and Maintenance Equals Good
Vacuum
Dick Amos and Simon Bruce, BOC Edwards Crawley, West Sussex, UK
V. Vacuum Deposition Systems
VI. Vacuum Deposition Components
Submission Guidelines for Technical Articles
If you would like to submit a technical article to be placed on the AVEM Web Site, please follow the instructions below. The article will remain on the AVEM Web Site for an indefinite time. There is no charge to post a technical article. However there is a one-time fee of $185 if you would like to add your logo and URL link to the article.
1. Format a header for the article, or use this MS Word template
TECHNICAL ARTICLE
(Arial 15 point Bold All CAPS)
(Arial 15 point Bold All CAPS)
Reprinted with permission from
(name of organization or publication) – if applicable
(Arial 10 point U/L case)
Title of Article
(Arial 14 point Bold U/L case)
Author
name(s), affiliation of author(s)
(Arial 12 point U/L case)
Company Logo: Logo can link to company Web site or the URL can be linked.
- Start article.
- Make sure that your company logo or Web address is linked to your Web Site before step #3.
- Submit a PDF file that is unlocked. AVEM may need to edit the header. AVEM will lock the PDF before placing it on the AVEM Web site..
- Send the PDF file to AVEM at aveminfo@avem.org.
- Specify the section that the article should be listed under. The options are:
- Vacuum Pumps
- Vacuum Instrumentation
- Vacuum Hardware
- Vacuum Systems
- Vacuum Deposition Systems
- Vacuum Deposition Components
- The Technical Article section of the AVEM Web Site is reserved for articles that have technical merit. If you wish to post News Releases, click here for more information.